60 Simple Router Trimmer Hacks | Japanese Woodworking

60 Simple Router Trimmer Hacks | Japanese Woodworking

*Download Plans (PDF)*
For inches: https://drive.google.com/drive/folders/1uIhmD1eyQ0B9lBK2BdV6Uvo25i2KZ5xh?usp=sharing
For millimeters: https://drive.google.com/drive/folders/1V8ojGAtEOuYcdSyIiK4PkwnXs1M_jztO?usp=sharing

1. Right Angle 00:00
2. 45° Bevel 00:44
3. Small Piece 01:24
4. End Grain 02:11
5. Post End 02:44
6. Miter Joint 03:43
7. Circle 04:45
8. Parallel 06:05
9. 90° Tilt 06:30
10. 45° Tilt 07:32
11. Expansion 08:35
12. Adjustable Circle 09:29
13. Adjustable Width 11:10
14. Tape Guide 12:29
15. Adjustable Parallel 13:09
16. Base Extension 13:46
17. Flush Cut 14:51
18. Thickness 15:20
19. Flattening Sled 15:57
20. Straight 18:27
21. Square 19:00
22. Square Board 19:20
23. Square Flush 20:07
24. Square Joint 20:30
25. Router Table 21:29
26. Router Table – Fence 22:40
27. Router Table – Jointer 22:54
28. Router Table – Round Tenon 23:40
29. Router Table – Crosscut Sled 24:18
30. Router Table – Box Joint 24:46
31. Router Table – Dovetail Joint 25:50
32. Router Table – Hollow Box 27:13
33. Twin Router Table – 2x Depth 28:32
34. Twin Router Table – 2x Width 29:52
35. Vertical Router Table 30:43
36. Dovetail L-Joint 31:47
37. Dovetail T-Joint 32:36
38. Batch Dovetail Joint 33:42
39. Multi Jig – Flush Cut 35:20
40. Multi Jig – Router Table 36:03
41. Multi Jig – Bottom Enlargement 36:16
42. Multi Jig – Blade Guide 36:37
43. Multi Jig – Width Adjustment 37:33
44. Multi Jig – Thickness 38:04
45. Multi Jig – Parallel 38:31
46. Multi Jig – Edge Groove 38:49
47. Multi Jig – Finger Joint 39:04
48. Multi Jig – Batch Box Joint 39:58
49. Multi Jig – Grid Pattern 40:51
50. Multi Jig – Circle 41:29
51. Rod 42:17
52. Hole Template 43:49
53. Corner Jig – Spline Miter Joint 44:39
54. Corner Jig – Beveled Joint 46:13
55. Corner Jig – Dovetail Miter Joint 47:18
56. T-Jig – Square Plug 48:20
57. T-Jig – Biscuit Joint 50:35
58. T-Jig – Hinge 50:56
59. T-Jig – Stitched Miter Joint 51:24
60. Tenon Template 52:36
Plan 53:56

—

*Router*
Brand: HIKOKI, Model: M3608DA

*Router Collet Cone 1/4″*
Brand: Makita, Model: 763637-1

*Router Bit*
Brand: SpeTool, Size: 1/4″ Shank – 1/4″ Cut Dia – 1″ Cut Height

*Router Bit*
Brand: SICWOOD, Size: 1/4″ Shank – 1/2″ Cut Dia – 1/2″ Cut Height

*Router Bit*
Brand: SICWOOD, Size: 1/4″ Shank – 1/2″ Cut Dia – 1″ Cut Height

*Router Bit Dovetail Bit*
Brand: SICWOOD, Size: 1/4″ Shank – 1/2″ Cut Dia – 1-7/8″ overall length

*Router Bit Dovetail Bit*
Brand: KOWOOD, Size: 1/4″ Shank – 1/2″ Cut Dia

*Router Bit Round Bit*
Brand: BOSCH

*Router Bit Surfacing bit*
Brand: KOWOOD PRO, Size: 1/4” Shank – 1-1/4” Cut Dia – 1/4” Cut Height – 3 Wings

*F‑Clamp 11.8 inches (300mm)*
Brand: JORGENSEN

*F‑Clamp 3.9 inches (100mm)*
Brand: JORGENSEN

*Toggle Clamp*
Brand: Yosoo, UPC: 719527432828

*Wood Glue*
Brand: Gorilla, Model: 6200001

*Super Glue*
Brand: LOCTITE, Model: LIC-460

*Epoxy Glue*
Brand: zmart, Model: 8265S

*Removable Double-Sided Tape*
Brand: Nitto Denko (Nitto), Model: 5000N

—

*#1 & #2*
Drilling a 20 mm (≈ 25/32 inch) hole at the dotted circle on the plan is optional, but it makes them safer to use.

*#19*
Linear Shaft Brand: YSK, Model: YSAA
Linear Bushing Brand: THK, Model: LM 16

#22, #24 & #59
If the cut doesn’t make a perfect arc, trim again from the perpendicular 90° face to get closer to a true arc.

*#56*
Router Bit Brand: Akylin, Model: FT6MS4B
Boring Bar Brand: NCC (formerly NICOTEC), Model: H-BM 24.0

*Circular Saw Jig Tutorial*

—

Note: When following the plans and instructions provided in this video, please proceed at your own risk. I cannot assume responsibility for any accidents or malfunctions that may occur during the creation or use of these projects. Always prioritize safety and wear appropriate protective gear while working.